THE PUMP DOES NOT RUN WHILE PUSHING THE PUMP RUN SWITCH

NOTE: PUMP RUN SWITCH ONLY WORKS IN ONE DIRECTION

IMPORTANT: ORIENTATION OF WIRE CONNECTIONS ON RELAYS MAY BE DIFFERENT THAN SHOWN. MAKE SURE TO CHECK WIRE NUMBERS OR WIRE TAGS

While pushing the pump run switch, check for a minimum of 10 volts between the ground stud on the side of the pump and the #9 terminal on the pump motor. Is a minimum of 10 volts present? NOTE: The motor terminal #9 may be in a different location on the motor, such as on the side of the motor case.