HYDRAULIC LEVELING SERVICE INFORMATION – JACK WARNING SWITCH

MI15100J – 2-WIRE MAGNETIC WARNING SWITCH INSTALLATION FOR STRAIGHT ACTING JACKS
MI1504 – 2-WIRE MAGNETIC WARNING SWITCH CONNECTION INFORMATION FOR STRAIGHT-ACTING JACKS INCLUDING:
WARNING SWITCH WITH A 2-WIRE GRAY PACKARD CONNECTOR TO A HARNESS WITH A 2-WIRE BLACK PACKARD CONNECTOR.
OR
WARNING SWITCH WITH A 2-WIRE GRAY PACKARD CONNECTOR TO A HARNESS WITH A 1-WIRE BLACK PACKARD CONNECTOR.
MI1503 – 2-WIRE TILT WARNING SWITCH CONNECTION INFORMATION FOR KICK-DOWN JACKS INCLUDING:
WARNING SWITCH WITH 2-WIRE BLACK PACKARD CONNECTOR TO A HARNESS WITH A 1-WIRE BLACK PACKARD CONNECTOR.
OR
WARNING SWITCH WITH 2-WIRE BLACK CONNECTOR TO A HARNESS WITH A SINGLE WIRE AND NO CONNECTOR.
MI154756 – CONNECTION INSTRUCTIONS FOR REPLACEMENT OF A 3-WIRE TILT WARNING SWITCH FOR KICK-DOWN JACKS. HARNESS WITH 1 WIRE AND A SINGLE PIN PACKARD CONNECTOR OR 2 WIRES AND A TWO PIN PACKARD CONNECTOR.
MI154757 – CONNECTION INSTRUCTIONS FOR REPLACEMENT OF A 3-WIRE MAGNETIC WARNING SWITCH FOR STRAIGHT-ACTING JACKS. HARNESS WITH 1 WIRE AND A SINGLE PIN PACKARD CONNECTOR OR 2 WIRES AND A TWO PIN PACKARD CONNECTOR.
MI154754 – CONNECTION INFORMATION FOR CYLINDER REPLACEMENT USING A WARNING/PRESSURE SWITCH INTERFACE. EXISTING CYLINDER IS EQUIPPED WITH A SINGLE WIRE SIDE PORT OR TOP MOUNT PLUNDER STYLE WARNING SWITCH. REPLACEMENT CYLINDER IS EQUIPPED WITH A 2-WIRE TOP MOUNTED MAGNETIC WARNING SWITCH.
MI1580 – CONNECTION DIAGRAM FOR AP9072 WARNING/PRESSURE SWITCH INTERFACE.