THE 15 AMP FUSE FOR THE PUMP RUN SWITCH RED 6100 WIRE IS BLOWN AND THERE IS NO CONTINUITY TO GROUND ON THE 6100 WIRE

IMPORTANT:
PUMP RUN SWITCH ONLY WORKS IN ONE DIRECTION
IGNITION SWITCH MUST BE OFF WHEN TESTING PUMP RUN SWITCH

Remove the black 8501 wire for the pump run switch from terminal #2 of the master relay.
Remove the black 8601 wire for the pump run switch from terminal #6 of the pump relay.
Protect the wire ring terminals so they cannot come into contact with a ground source.
Replace the 15 amp fuse and push the pump run switch. Does the fuse blow?