NOTE: TS39670 KIT CONTAINS ALL PARTS LISTED BELOW.

TS39641: MULTI-PURPOSE VOLTAGE AND GROUND TEST PIGTAIL. USED TO CHECK IN-USE VOLTAGE SUPPLY FOR SOLENOID VALVES – HYDRAULIC OR AIR. THIS PIGTAIL PLUGS IN BETWEEN THE HARNESS PLUG AND THE VALVE. THIS PIGTAIL CAN BE USED WHEN TESTING TWO WIRE WARNING SWITCHES, LIMIT SWITCHES. AND PRESSURE SWITCHES WITH TWO PIN BLACK PACKARD CONNECTORS.

TS39643: MULTI PURPOSE SWITCH TEST PIGTAIL. THIS PIGTAIL IS USED TO SIMULATE ANY TWO WIRE WARNING SWITCH, PRESSURE SWITCH, OR LIMIT SWITCH WITH A TWO PIN GRAY OR BLACK PACKARD CONNECTOR. THE PIGTAIL PLUGS INTO THE HARNESS INSTEAD OF THE SWITCH BEING TESTED.

TS39644: INDICATOR SWITCH TEST PIGTAIL – ONE WIRE. THIS PIGTAIL IS USED TO SIMULATE ANY ONE WIRE INDICATOR SWITCH SUCH AS A JACK OR MANIFOLD PRESSURE SWITCH WITH A SINGLE PIN PACKARD CONNECTOR. THIS PIGTAIL PLUGS INTO THE APPROPRIATE HARNESS INSTEAD OF THE SWITCH BEING TESTED.

TS39640: 12 VOLT TEST LIGHT WITH 2 PIN BLACK PACKARD CONNECTOR

TS44002: SENSING UNIT TEST PIGTAIL. USED TO ISOLATE A ELECTRONIC SENSING UNIT FROM A SYSTEM. THIS PIGTAIL CAN BE USED TO EMULATE FRONT, REAR, RIGHT, AND LEFT SENSE. IT ALSO INCLUDES A LIGHT THAT ILLUMINATES WHEN THERE IS +12V.

TS51233: SENSING UNIT GROUND JUMPER – ONE WIRE. THIS PIGTAIL IS USED TO GROUND THE ELECTRONIC SENSING UNIT SENSITIVITY PIN.

TS5057 CONTACT EXTRACTION TOOL
(AMP #458994-1)

RT500111 PIN (SOLD IN BAGS OF 20)

TS46742 CRIMPERS – THOMAS & BETTS WT111M

TS46743 STRIPPERS – IDEAL INDUSTRIES INC. 45-092