GENERAL HWH® ENVIRONMENTAL AIR SEAL INFORMATION

• Air seals are made of an inflatable seal that goes around the perimeter of a slide-out to provide a superior seal against the outside elements.

• Air is forced into the seal after the slide-out has been fully extended or retracted.

• Before the slide-out can be extended or retracted the air seal has to be deflated.

• HWH® air seals are pressurized by their own small air compressor and tank.

• With HWH® slide-out systems, the slide-out control key has to be on to evacuate air from the seal and operate the slide-out.

• After a timed delay, the slide-out panel will indicate the slide-out is ready to operate.

• The slide-out will not operate until the panel indicates the air seal is deflated and it is safe to operate the slide-out without damaging the air seal.

• The air seal will inflate when the slide-out control key switch is turned off or if the ignition switch is slide-out off.