*Some parts removed for clarity
LIFT PLATFORM MECHANISM
80.25" WIDE
| ITEM NO. | Part No. | Qty. | Description |
| 1. | AP46136 | 2 | MR SCR WELDMENT 1/2X10.000 |
| 2. | AP53921 | 2 | IDLER LEFT HAND WELDMENT |
| 3. | AP53922 | 2 | IDLER RIGHT HAND WELDMENT |
| 4. | AP56803 | 2 | SIDE WELDMENT LH |
| 5. | AP56804 | 2 | SIDE WELDMENT RH |
| 6. | AP56884 | 2 | PLATE MOUNTING WELDMENT |
| 7. | AP56885 | 2 | ANGLE MOUNTING WELDMENT |
| 8. | AP57231 | 1 | CYLINDER ASSEMBLY 1.25″ INNER DIAMETER X 4.8″ STROKE |
| 9. | RAP57232 | 1 | CYLINDER/VALVE ASSEMBLY 1.25″ INNER DIAMETER X 4.8″ STROKE |
| 10. | AP59644 | 1 | LIFT MECHANISM WELDMENT 80.250″ WIDE |
| 11. | H103708 | 12 | HEX HEAD CAP SCREW 3/8-16 X 1.000 WHIZ LARGE FLANGE |
| 12. | H113704 | 4 | HEX NUT 3/8-16 WHIZ LARGE FLANGE PLATED |
| 13. | H131037 | 4 | WASHER FLAT 3/8 PLATED |
| 14. | H170602 | 2 | #6 X 0.375 PHILLIPS HEAD TYPE B PLATED |
| 15. | H191126 | 2 | COTTER PIN 1/8 X 2.000 PLATED |
| 16. | H195123 | 2 | ROLL PIN 1/8 X 2.000 PLATED |
| 17. | P22963 | 12 | RIVET 3/16 SS FLAT |
| 18. | P23959 | 2 | WASHER 0.840 X 0.125 |
| 19. | P40961 | 2 | WASHER 0.840 X 0.200 |
| 20. | P43221 | 3 | ANGLE BEARING 6.0 |
| 21. | P44214 | 2 | MANUAL RETRACT GUIDE |
| 22. | P44215 | 10 | BUSHING 1.625 X 0.580 |
| 23. | P44216 | 2 | PIVOT PIN 3.950 |
| 24. | P44217 | 2 | PIN 0.566 X 3.950 |
| 25. | RP44224 | 2 | PIN 0.375 X 3.000 |
| 26. | P46134 | 2 | BUSHING: THRD DRL |
| 27. | P53923 | 1 | IDLER LH PAINTED |
| 28. | P53924 | 1 | IDLER RH PAINTED |
| 29. | P54187 | 1 | SPLINED SHAFT 77.250 |
| 30. | P56855 | 2 | ANGLE MTG 1.5X1.5X9.625 |
| 31. | P58745 | 2 | WASHER 0.840X1.325 |
| 32. | S-5100-37 | 4 | WALDES RING |
| 33. | S-5100-56 | 8 | SNAP RING |