CONTROL PANEL AND INDICATOR LIGHTS FOR COMPUTER-CONTROLLED, HYDRAULIC LEVELING SYSTEMS (PADDLE SWITCH)
IMPORTANT: New or rebuilt panels are not available.
Contact HWH for information or RGA return number.
The face of these panels are 6.75 X 5.75 inches and usually have seven paddle switches with red, yellow or black lens. Other switch arrangements may be used. A printed circuit board is permanently attached to the back of the switches.
Immediately below is a listing of all replacement components.
Following the replacement components is a listings of all paddle switch panels. Replacement panels are listed but are not available.
REPLACEMENT COMPONENTS FOR COMPUTER-CONTROLLED SYSTEM PANELS
A bulb is located under all yellow and red lenses
TO REMOVE BULB:
1- Remove lenses by lifting next to paddle.
2- Lift metal tab to pull bulb.
REPLACEMENT PARTS
- R3674 FUSE 5 AMP AGC (qty: 5)
- RP3654 BULB #73 (qty: 5)
- RP3655 LENS YELLOW (qty: 2)
- RP3656 LENS BLACK (qty: 2)
- RP3657 LENS RED (qty: 2)
- RP4946 LENS RED LOW VOLT (qty: 1)
LIST OF 400 SERIES PADDLE SWITCH PANELS
STANDARD FACE PANELS – SERIES 400
|
USED WITH KICKDOWN JACKS All replacement panels will have the AUTO OFF feature. The replacement panel may have a different color than the original. SENSING UNIT REPLACEMENT: The sensing unit for all panels on this page is RAP36075. The retrofit kit RAP91742 must also be ordered. |
FEATURES:NOTE: Panels should have a tag with the part number on the back.
Panels with a blue dot on the back are AP3915.
Panels with an orange dot are AP3659.
| EXISTING PANEL |
AIR DUMP |
AUTO OFF |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP3659 | NO | NO | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP3849 | NO | NO | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP3850 * | YES | NO | EXTENDS ONE JACK AT A TIME | RAP5698 |
| AP3915 * | YES | NO | EXTENDS ONE JACK AT A TIME | RAP5698 |
| AP4142 * | NO | NO | IF IN A BLUE BIRD COACH: EXTENDS ONE JACK AT A TIME | RAP4679 |
| AP4142 * | NO | NO | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP4577 * | NO | NO | IF IN A BLUE BIRD COACH: EXTENDS ONE JACK AT A TIME | RAP4679 |
| AP4577 * | NO | NO | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP4679 | NO | YES | AIR MUST BE DUMPED MANUALLY, REAR JACKS MAY BE STRAIGHT-ACTING | RAP4679 |
| AP4690 | YES | NO | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
| AP4775 | NO | NO | EXTENDS FRONT JACKS TOGETHER | RAP5701 |
| AP4811 | YES | NO | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
| AP4829 | NO | NO | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP4835 | YES | NO | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
| AP5675 | YES | YES | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
| AP5698 | YES | YES | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
| AP5699 | NO | YES | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP5701 | NO | YES | EXTENDS FRONT JACKS TOGETHER | RAP5701 |
| AP5721 | NO | YES | EXTENDS ONE JACK AT A TIME | RAP5699 |
| AP5722 | YES | YES | MAY EXTEND TWO JACKS AT ONCE | RAP5698 |
If replacing this panel, the sensing unit must also be replaced. See above FEATURES.
BI-AXIS PANEL – SERIES 400
|
USED WITH KICKDOWN JACKS All replacement panels will have the AUTO OFF feature. The replacement panel may have a different color than the original. Two black line brackets. One line designating the 4 yellow lights and 4 lower switches as Left Side, Front, Right Side, and Rear. The second line designating the 4 lower red lights as Left Rear, Left Front, Right Front, and Right Rear. SENSING UNIT REPLACEMENT: The sensing unit for all panels on this page is RAP30618. The retrofit kit RAP91742 must also be ordered. |
FEATURES:NOTE: Panels should have a tag with the part number on the back.
| EXISTING PANEL |
AIR DUMP |
AUTO OFF |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP4951 | NO | NO | BI-AXIS | RAP5702 |
| AP4953 | YES | NO | BI-AXIS | RAP5692 |
| AP5692 | YES | YES | BI-AXIS – ALWAYS EXTENDS TWO JACKS AT ONCE | RAP5692 |
| AP5702 | NO | YES | BI-AXIS – ALWAYS EXTENDS TWO JACKS AT ONCE | RAP5702 |
REMOTE 2 SWITCH PANEL – SERIES 400
FOR COMPUTER PANELS WITHOUT
AUTO OFF FEATURE
|
RAP4223 PANEL 2 SW REMOTE
FEATURES: USED WITH KICKDOWN JACKS All replacement panels will have the AUTO OFF feature. The replacement panel may have a different color than the original. SENSING UNIT REPLACEMENT: The sensing unit for all panels on this page is RAP36075. The retrofit kit RAP91742 must also be ordered. |
This panel contains only the ‘MASTER’ switch and ‘AUTOMATIC LEVEL/RETRACT’ switch.NOTE: Panels should have a tag with the part number on the back.
| EXISTING PANEL |
AIR DUMP |
AUTO OFF |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP4222 | NO | NO | EXTENDS ONE JACK AT A TIME | RAP4222 |
| AP4365 * | YES | NO | EXTENDS ONE JACK AT A TIME | RAP4920 |
| AP4920 | YES | NO | MAY EXTEND TWO JACKS AT ONCE | RAP4920 |
If replacing this panel, the sensing unit must also be replaced. See above FEATURES.
REMOTE 2 SWITCH PANEL – SERIES 400 – BI-AXIS LEVELING
|
RAP5259 PANEL 2 SW REMOTE
FEATURES: USED WITH KICKDOWN JACKS No ‘MASTER’ or ‘AUTOMATIC LEVEL / RETRACT’ switch on the main panel. Two black line brackets. One line designating the 4 yellow lights and 4 lower switches as Left Side, Front, Right Side, and Rear. The second line designating the 4 lower red lights as Left Rear, Left Front, Right Front, and Right Rear. SENSING UNIT REPLACEMENT: The sensing unit for all panels on this page is RAP30618. The retrofit kit RAP91742 must also be ordered. |
This panel contains only the ‘MASTER’ switch and ‘AUTOMATIC LEVEL/RETRACT’ switch.NOTE: Panels should have a tag with the part number on the back.
| EXISTING PANEL |
AIR DUMP |
AUTO OFF |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP5258 | YES | YES | BI-AXIS – ALWAYS EXTENDS TWO JACKS AT A TIME | RAP5258 |
STANDARD PANEL – STRAIGHT-ACTING JACKS – SERIES 400
|
USED WITH STRAIGHT-ACTING JACKS The absence of the ‘HORIZONTAL / VERTICAL’ switch. The replacement panel may have a different color than the original. SENSING UNIT REPLACEMENT: The sensing unit for all panels on this page is RAP36075. The retrofit kit RAP91742 must also be ordered. |
FEATURES:NOTE: Panels should have a tag with the part number on the back.
| EXISTING PANEL |
AIR DUMP |
AUTO OFF |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP5548 | NO* | YES | USE WITH STRAIGHT-ACTING JACKS ONLY – BROWN PANEL | RAP6989 |
| AP5615 | NO* | YES | USE WITH STRAIGHT-ACTING JACKS ONLY – GRAY PANEL | RAP6989 |
| AP6989 | NO* | YES | USE WITH STRAIGHT-ACTING JACKS ONLY – BLACK PANEL | RAP6989 |
*Air must be manually dumped from the suspension before leveling.
THREE JACK CONTROL PANEL – SERIES 400
USED ON 1985 EXECUTIVE IND. COACHES ONLY
|
Color: Silver with black lettering. “E I I Ind.” name on face. The presence of the ‘MASTER’ switch and ‘AUTOMATIC LEVEL / RETRACT’ switch on the face rather than on a separate panel. The absence of the ‘HORIZONTAL / VERTICAL’ switch. SENSING UNIT REPLACEMENT:Contact HWH Technical service if the level sensing unit must be replaced. |
DISTINGUISHING FEATURES:NOTE: Panels should have a tag with the part number on the back.
| EXISTING PANEL |
AIR DUMP |
OPERATIONAL FEATURES | REPLACEMENT PANEL |
| AP4191 | NO | FOR USE WITH THREE STRAIGHT-ACTING JACKS ONLY | RAP4495 |
| AP4495 | NO | FOR USE WITH THREE STRAIGHT-ACTING JACKS ONLY | RAP4495 |