A swaging tool and the appropriate die and pusher is required to make hose assemblies.

A square and clean hose cut is required to make hose assemblies.

PUSHER
Refer to ML24976 for further swaging information.

TS13676 – For 1/8" Parker Hose Ends
TS52707 – For 3/16″ Hose Ends
TS52707 – For 1/4" Hose Ends

DIE SETS
Refer to ML24976 for further swaging information.

TS44677 – For 1/8" Parker Hose Ends
TS51677 – For 3/16″ Hose Ends
TS44675 – For 1/4" Hose Ends

NOTE: Swaging tools, pushers and dies must be marked
with HWH Part Numbers. DO NOT use unmarked parts.